友情连接
The installation of Audi A4L
发布日期: 2018/3/26 浏览次数: 142

Remove the trunk floor as indicated by the arrow

Open the screws according to the arrows and take off the warning sign

Remove this screw at the door handle and remove the plaque

Open the right plaque

Undo the button to remove the plaque

 

As shown in the figure to install our company electric pole

Install our ball head and electric pole as shown in the picture

electric pole installation complete diagram

As shown in the figure

Brace Holzer cable traces as shown

Remove the original car lock shown in the picture, install our electric suction lock

Take out the motor's screws and place it on the motor as shown in the figure.

As shown in the figure, screw the cord to the motor

Fix it with original motor screws and tighten the screws with a wrench
Plug the motor socket into the power socket
Paste our 3M adhesive on the back of the motor

In the tail door trim hole installation of our company tailgate switch
After the installation is complete, you must set the tailgate learning. Make sure that the door can be turned on and off.

 

 

深圳市明亚科技有限公司 - The installation of Audi A4L
 
   联系我们  |  销售网络  |   下载中心     
   24小时客服热线:400-705-9608   E-mail:sonls@sonls.com   Tel: 86-755-84419519 / 84419529 转806 / 807   Fax: 86-755-84419316
版权所有:深圳市兴嘉林电子科技有限公司    粤ICP备05089774号    Copyright 2001-2017 All Rights Reserved.