友情连接
The installation of Honda
发布日期: 2018/3/27 浏览次数: 333

Remove the original plaque and electric pole, pay attention to the need to hold the door in the middle when removing the electric pole

Remove the left lower bracket of the original car, install the special left lower bracket and fix it with the original car screws

Install the brace with the original ball head (left and right steps are the same)

Remove the right lower bracket of the car, install the special right lower bracket, and use the original car screws to fix the bracket

Remove the left and right lights, strut wire alignment

After removing the lights, cut the original car hose, the struts and the original car wiring harness

Electric pole from the lights at the line through the waterproof rubber plugs to the tail door cover

Under the main drive, remove the plaque, find the power, unplug the original car 20A fuse, plug in our power plug

Locate the left side of the main driving power, find the grounding screw, and connect the earth  wire

Remove the original car under the main drive empty button, install the front switch button

In the main driving seat belt B pillar remove the plaque, find the original car control cable

Unplug the original car socket, our company's yellow control line to connect the white line (the first row of the second hole from the right to the left)

The power cable and the central control cable are routed through the original car waterproof rubber plug to the tailgate

Unplug this seat from the original door lock and insert the three-way plug into this termianal housing.

Find the original car open door button, pull the seat on the back of the car, the front switch throws a line connected to the pink line (the second hole in the second row from left to right)

The front switch connects the other screw to this screw

Remove the original car door lock, install our electric suction lock, use the original car screws

As shown in the picture, plug in the power socket

Connect the Hall line, central control line and power line to our control box and install the control box at the tailgate
Install the tailgate switch button here

After the installation is complete, please make the back door learning settings. Please make sure the door can be closed.

 

深圳市明亚科技有限公司 - The installation of Honda
 
   联系我们  |  销售网络  |   下载中心     
   24小时客服热线:400-705-9608   E-mail:sonls@sonls.com   Tel: 86-755-84419519 / 84419529 转806 / 807   Fax: 86-755-84419316
版权所有:深圳市兴嘉林电子科技有限公司    粤ICP备05089774号    Copyright 2001-2017 All Rights Reserved.